Design and Development of Agglomerated Isomalt.

The objective of this study was to prepare agglomerated isomalt by using the melt granulation process. This method involved the use of 99.5% of isomalt with the meltable binder glyceryl monostearate in a concentration of 0.5%. Glyceryl monostearate has a melting point of 50°C to 55°C, therefore, glyceryl monostearate was melted at its melting point and isomalt powder was blended with it to break the mass into agglomerates. The agglomerates were cooled to room temperature and were then screened to obtain granules of the desired size. The Fourier Transform Infrared Spectroscopy studies confirmed that the chemical structure of isomalt was not changed before and after the melt granulation process. A differential scanning calorimetry study showed that there was no appearance of more new peaks or disappearance of  one or more peaks corresponding to those of the isomalt powder and agglomerated isomalt, which showed no changes in the structure of the isomalt powder before and after the agglomeration process. The agglomerated isomalt and galenIQ 721 showed almost identical solubility profiles for g of solute per 100 g of solution at different temperatures. The scanning electron microscopy analysis of agglomerated isomalt showed promising results for the preparation of agglomerates of isomalt with glyceryl monostearate. The flow properties of the agglomerated isomalt compared with the galenIQ 721 and pure isomalt powder and melt granulation process showed promising results for agglomerated isomalt. The melt granulation process showed promising results to prepare agglomerates of the isomalt with the meltable binder glyceryl monostearate.

Rapidly evaluating the caking tendency of sugar alcohols by developing a crystal bridge growth model: A case study of xylitol.

Caking of crystalline sugar alcohols is a deleterious and undesired agglomeration process during storage in the food industry. Compared with the time-consuming and labor-intensive conventional caking assessment methods, this work develops a rapid methodology for evaluation of the critical caking cycle of xylitol with over 85% time-saving and 90% labor-saving while guaranteeing the precision accuracy. By developing a Caking-Hygroscopicity-Particle size crystal bridge growth model, the correlation and quantitative relationships among hygroscopic properties, particle size and the critical caking cycle are firstly established and confirmed, which can greatly simplify the most time-consuming and laborious experiments of water sorption measurements and caking tests. Besides, the knowledge obtained can help guide the rapid selection of storage humidity conditions and appropriate particle size distributions for maintaining the desired properties and competitive marketability of crystalline sugar alcohols.

Quantification of polyols in sugar-free foodstuffs by qNMR.

We present a qNMR method for the determination of low calories sweeteners (erythritol, mannitol, maltitol, sorbitol, isomalt and xylitol) in sugar-free foodstuff. The structural similarities of these compounds determine often a severe spectral overlap that hampers their quantification via conventional 1D and 2D NMR spectra. This problem is here overcome by exploiting the resolving capabilities of the CSSF-TOCSY experiment, allowing the quantification of all six polyols, with satisfactory results in terms of LoQ (2.8-7.4 mg/L for xylitol, mannitol, sorbitol, 15 mg/L for erythritol, 38 mg/L for maltitol and 91 mg/L for isomalt), precision (RSD% 0.40-4.03), trueness (bias% 0.15-4.81), and recovery (98-104%). Polyol's quantification in different sugar-free confectionary products was performed after a simple water extraction without any additional sample treatment. While these results demonstrate the robustness of the proposed method for polyols quantification in low calories foods, its applicability can be further extended to other food matrices or biofluids.

Rotamers in Crystal Structures of Xylitol, D-Arabitol and L-Arabitol.

Rotamers are stereoisomers produced by rotation (twisting) about σ bonds and are often rapidly interconverting at room temperature. Xylitol-massively produced sweetener-(2R,3r,4S)-pentane-1,2,3,4,5-pentol) forms rotamers from the linear conformer by rotation of a xylitol fragment around the C2-C3 bond (rotamer 1) or the C3-C4 bond (rotamer 2). The rotamers form two distinguishable structures. Small differences in geometry of rotamers of the main carbon chain were confirmed by theoretical calculations; however, they were beyond the capabilities of the X-ray powder diffraction technique due to the almost identical unit cell parameters. In the case of rotamers of similar compounds, the rotations occurred mostly within hydroxyl groups likewise rotations in L-arabitol and D-arabitol, which are discussed in this work. Our results, supported by theoretical calculations, showed that energetic differences are slightly higher for rotamers with rotations within hydroxyl groups instead of a carbon chain.

Direct conversion of almond waste into value-added liquids using carbon-neutral catalysts: Hydrothermal hydrogenation of almond hulls over a Ru/CNF catalyst.

The almond industry leaves behind substantial amounts of by-products, with almond hulls being the primary residue generated. Given that one way to improve food security is by decreasing waste to reduce environmental impacts, developing sustainable processes to manage this by-product is necessary. Herein, we report on the hydrothermal hydrogenation of almond hulls over a carbon-neutral Ru supported on carbon nanofibres (Ru/CNF) catalyst, addressing the temperature, H2 pressure, time and catalyst loading. These variables controlled the distribution of the reaction products: gas (0-5%), liquid (49-82%) and solid (13-51%), and ruled the composition of the liquid effluent. This aqueous fraction comprised oligomers (46-81 wt%), saccharides (2-7 wt%), sugar alcohols (2-15 wt%), polyhydric alcohols (1-8 wt%) and carboxylic acids (7-31 wt%). The temperature and reaction time influenced the extension of hydrolysis, depolymerisation, deamination, hydrolysis, hydrogenation and dehydration reactions. Additionally, the initial H2 pressure and catalyst loading kinetically promoted these transformations, whose extensions were ruled by the amount of H2 effectively dissolved in the reaction medium and the prevalence of hydrogenations over dehydration/decarboxylation reactions or vice versa depending on the catalyst loading. Process optimisation revealed that it is feasible to convert up to 67% of almond hulls into merchantable oligomers at 230 °C, 35 bar initial H2, using 1 g catalyst/g biomass (0.4 g Ru/g biomass) for 360 min. Additionally, decreasing the temperature to 187 °C without modifying the other parameters could convert this material into oligomers (31 wt%) and small oxygenates (17 wt% carboxylic acids, 11 wt% sugar alcohols and 6 wt% polyhydric alcohols) concurrently. The theoretical energy assessment revealed that the total and partial combustion of the spent solid material could provide the required energy for the process and allow catalyst recovery and reutilisation. This environmental friendliness and holistic features exemplify a landmark step-change to valorising unavoidable food waste.

Antimicrobial, Cytotoxic and Mutagenic Activity of Gemini QAS Derivatives of 1,4:3,6-Dianhydro-l-iditol.

A series of quaternary diammonium salts derivatives of 1,4:3,6-dianhydro-l-iditol were synthesized, using isommanide (1,4:3,6-dianhydro-d-mannitol) as a starting material. Both aromatic (pyridine, 4-(N,N-dimethylamino)pyridine (DMAP), (3-carboxamide)pyridine; N-methylimidazole) and aliphatic (trimethylamine, N,N-dimethylhexylamine, N,N-dimethyloctylamine, N,N-dimethyldecylamine) amines were used, giving eight gemini quaternary ammonium salts (QAS). All salts were tested for their antimicrobial activity against yeasts, Candida albicans and Candida glabrata, as well as bacterial Staphylococcus aureus and Escherichia coli reference strains. Moreover, antibacterial activity against 20 isolates of S. aureus collected from patients with skin and soft tissue infections (n = 8) and strains derived from subclinical bovine mastitis milk samples (n = 12) were evaluated. Two QAS with octyl and decyl residues exhibited antimicrobial activity, whereas those with two decyl residues proved to be the most active against the tested pathogens, with MIC of 16-32, 32, and 8 µg/mL for yeast, E. coli, and S. aureus reference and clinical strains, respectively. Only QAS with decyl residues proved to be cytotoxic in MTT assay against human keratinocytes (HaCaT), IC50 12.8 ± 1.2 µg/mL. Ames test was used to assess the mutagenic potential of QAS, and none of them showed mutagenic activity in the concentration range 4-2000 µg/plate.

Isopropyl 3-deoxy-α-D-ribo-hexopyranoside (isopropyl 3-deoxy-α-D-glucopyranoside): evaluating trends in structural parameters.

Isopropyl 3-deoxy-α-D-ribo-hexopyranoside (isopropyl 3-deoxy-α-D-glucopyranoside), C9H18O5, (I), crystallizes from a methanol-ethyl acetate solvent mixture at room temperature in a 4C1 chair conformation that is slightly distorted towards the C5SC1 twist-boat form. A comparison of the structural parameters in (I), methyl α-D-glucopyranoside, (II), α-D-glucopyranosyl-(1→4)-D-glucitol (maltitol), (III), and 3-deoxy-α-D-ribo-hexopyranose (3-deoxy-α-D-glucopyranose), (IV), shows that most endocyclic and exocyclic bond lengths, valence bond angles and torsion angles in the aldohexopyranosyl rings are more affected by anomeric configuration, aglycone structure and/or the conformation of exocyclic substituents, such as hydroxymethyl groups, than by monodeoxygenation at C3. The structural effects observed in the crystal structures of (I)-(IV) were confirmed though density functional theory (DFT) calculations in computed structures (I)c-(IV)c. Exocyclic hydroxymethyl groups adopt the gauche-gauche (gg) conformation (H5 anti to O6) in (I) and (III), and the gauche-trans (gt) conformation (C4 anti to O6) in (II) and (IV). The O-glycoside linkage conformations in (I) and (III) resemble those observed in disaccharides containing ß-(1→4) linkages.

A norbisabolane and an arabitol benzoate from Talaromyces marneffei, an endophytic fungus of Epilobium angustifolium.

A norbisabolane and an arabitol benzoate, Talaromarnine A (1), Talaromarnine B (2), together with eight known compounds were obtained from cultures of Talaromyces marneffei, an endophytic fungus of Epilobium angustifolium. Their structures were elucidated by IR, MS, 1D and 2D NMR spectra, and their absolute configuration was determined by single-crystal X-ray diffraction and molecular computation. These compounds were tested for monoamine oxidase, acetylcholinesterase and PI3K inhibitory activity, but no compounds exhibited significant activities.

Stabilizers and their interaction with formulation components in frozen and freeze-dried protein formulations.

This review aims to provide an overview of the current knowledge on protein stabilization during freezing and freeze-drying in relation to stress conditions commonly encountered during these processes. The traditional as well as refined mechanisms by which excipients may stabilize proteins are presented. These stabilizers encompass a wide variety of compounds including sugars, sugar alcohols, amino acids, surfactants, buffers and polymers. The rational selection of excipients for use in frozen and freeze-dried protein formulations is presented. Lyophilized protein formulations are generally multicomponent systems, providing numerous possibilities of excipient-excipient and protein-excipient interactions. The interplay of different formulation components on the protein stability and excipient functionality in the frozen and freeze-dried systems are reviewed, with discussion of representative examples of such interactions.

Microwave-Assisted One-Pot Lipid Extraction and Glycolipid Production from Oleaginous Yeast Saitozyma podzolica in Sugar Alcohol-Based Media.

Glycolipids are non-ionic surfactants occurring in numerous products of daily life. Due to their surface-activity, emulsifying properties, and foaming abilities, they can be applied in food, cosmetics, and pharmaceuticals. Enzymatic synthesis of glycolipids based on carbohydrates and free fatty acids or esters is often catalyzed using certain acyltransferases in reaction media of low water activity, e.g., organic solvents or notably Deep Eutectic Systems (DESs). Existing reports describing integrated processes for glycolipid production from renewables use many reaction steps, therefore this study aims at simplifying the procedure. By using microwave dielectric heating, DESs preparation was first accelerated considerably. A comparative study revealed a preparation time on average 16-fold faster than the conventional heating method in an incubator. Furthermore, lipids from robust oleaginous yeast biomass were successfully extracted up to 70% without using the pre-treatment method for cell disruption, limiting logically the energy input necessary for such process. Acidified DESs consisting of either xylitol or sorbitol and choline chloride mediated the one-pot process, allowing subsequent conversion of the lipids into mono-acylated palmitate, oleate, linoleate, and stearate sugar alcohol esters. Thus, we show strong evidence that addition of immobilized Candida antarctica Lipase B (Novozym 435®), in acidified DES mixture, enables a simplified and fast glycolipid synthesis using directly oleaginous yeast biomass.

Kinetic and thermodynamic insights into the inhibitory mechanism of TMG-chitotriomycin on Vibrio campbellii GH20 exo-ß-N-acetylglucosaminidase.

We investigated the inhibition kinetics of VhGlcNAcase, a GH20 exo-ß-N-acetylglucosaminidase (GlcNAcase) from the marine bacterium Vibrio campbellii (formerly V. harveyi) ATCC BAA-1116, using TMG-chitotriomycin, a natural enzyme inhibitor specific for GH20 GlcNAcases from chitin-processing organisms, with p-nitrophenyl N-acetyl-ß-d-glucosaminide (pNP-GlcNAc) as the substrate. TMG-chitotriomycin inhibited VhGlcNAcase with an IC50 of 3.0 ± 0.7 µM. Using Dixon plots, the inhibition kinetics indicated that TMG-chitotriomycin is a competitive inhibitor, with an inhibition constant Ki of 2.2 ± 0.3 µM. Isothermal titration calorimetry experiments provided the thermodynamic parameters for the binding of TMG-chitotriomycin to VhGlcNAcase and revealed that binding was driven by both favorable enthalpy and entropy changes (ΔH° = -2.5 ± 0.1 kcal/mol and -TΔS° = -5.8 ± 0.3 kcal/mol), resulting in a free energy change, ΔG°, of -8.2 ± 0.2 kcal/mol. Dissection of the entropic term showed that a favorable solvation entropy change (-TΔSsolv° = -16 ± 2 kcal/mol) is the main contributor to the entropic term.

Synthesis and structure-activity studies of novel anhydrohexitol-based Leucyl-tRNA synthetase inhibitors.

Leucyl-tRNA synthetase (LeuRS) is a clinically validated target for the development of antimicrobials. This enzyme catalyzes the formation of charged tRNALeu molecules, an essential substrate for protein translation. In the first step of catalysis LeuRS activates leucine using ATP, forming a leucyl-adenylate intermediate. Bi-substrate inhibitors that mimic this chemically labile phosphoanhydride-linked nucleoside have proven to be potent inhibitors of different members of the aminoacyl-tRNA synthetase family but, to date, they have demonstrated poor antibacterial activity. We synthesized a small series of 1,5-anhydrohexitol-based analogues coupled to a variety of triazoles and performed detailed structure-activity relationship studies with bacterial LeuRS. In an in vitro assay, Kiapp values in the nanomolar range were demonstrated. Inhibitory activity differences between the compounds revealed that the polarity and size of the triazole substituents affect binding. X-ray crystallographic studies of N. gonorrhoeae LeuRS in complex with all the inhibitors highlighted the crucial interactions defining their relative enzyme inhibitory activities. We further examined their in vitro antimicrobial properties by screening against several bacterial and yeast strains. While only weak antibacterial activity against M. tuberculosis was detected, the extensive structural data which were obtained could make these LeuRS inhibitors a suitable starting point towards further antibiotic development.

Elongation of the side chain by linear alkyl groups increases the potency of salacinol, a potent α-glucosidase inhibitor from the Ayurvedic traditional medicine "Salacia," against human intestinal maltase.

Four chain-extended analogs (12a-12d) and two related de-O-sulfonated analogs (13a and 13c) by introducing alkyl groups (a: R = C3H7, b R = C6H13, c: R = C8H17, d: R = C10H21) to the side chains of salacinol (1), a natural α-glucosidase inhibitor from Ayurvedic traditional medicine "Salacia", were synthesized. The α-glucosidase inhibitory activities of all the synthesized analogs were evaluated in vitro. Against human intestinal maltase, the inhibitory activities of 12a and 13a with seven-carbon side chain were equal to that of 1. In contrast, analogs (12b-12d, and 13c) exhibited higher level of inhibitory activity against the same enzyme than 1 and had equal or higher potency than those of the clinically used anti-diabetics, voglibose, acarbose, and miglitol. Thus, elongation of the side chains of 1 was effective for specifically increasing the inhibitory activity against human intestinal maltase.

Structure of a GH51 α-L-arabinofuranosidase from Meripilus giganteus: conserved substrate recognition from bacteria to fungi.

α-L-Arabinofuranosidases from glycoside hydrolase family 51 use a stereochemically retaining hydrolytic mechanism to liberate nonreducing terminal α-L-arabinofuranose residues from plant polysaccharides such as arabinoxylan and arabinan. To date, more than ten fungal GH51 α-L-arabinofuranosidases have been functionally characterized, yet no structure of a fungal GH51 enzyme has been solved. In contrast, seven bacterial GH51 enzyme structures, with low sequence similarity to the fungal GH51 enzymes, have been determined. Here, the crystallization and structural characterization of MgGH51, an industrially relevant GH51 α-L-arabinofuranosidase cloned from Meripilus giganteus, are reported. Three crystal forms were grown in different crystallization conditions. The unliganded structure was solved using sulfur SAD data collected from a single crystal using the I23 in vacuo diffraction beamline at Diamond Light Source. Crystal soaks with arabinose, 1,4-dideoxy-1,4-imino-L-arabinitol and two cyclophellitol-derived arabinose mimics reveal a conserved catalytic site and conformational itinerary between fungal and bacterial GH51 α-L-arabinofuranosidases.

Quantification of γ-sorbitol crystal growth rate and solubility in the presence of mannitol and maltitol.

In many confectionery systems, an understanding of crystallization behavior is essential for proper control of product texture. While this knowledge is well developed in sucrose-based systems, there is little information on controlling crystallization in sugar-free systems, such as those formulated with sorbitol. By leveraging such advances in time domain-nuclear magnetic resonance (TD-NMR) methodology, the impact of mannitol and maltitol on modulating sorbitol crystal growth in sugar-free systems. Binary and ternary systems of sorbitol mixed with mannitol, maltitol, or a mixture thereof were evaluated at total impurity addition levels of 10% and 20%. Polyol mixtures were dissolved in water, evaporated to 10% moisture, and mixed with γ sorbitol seed crystals to create a sugar-free fondant. Fondants were crystallized at 25 °C, and crystal content was measured using TD-NMR over time. Crystal content increased rapidly at the start but quickly tapered off to a final asymptote indicating phase equilibrium. In all systems, the addition of impurities decreased the extent and rate of sorbitol crystallization, with mannitol having the greatest impact on rate. When both mannitol and maltitol were present as impurities, the rate of crystallization was reduced to a greater extent. At the highest level of mannitol, the final crystal content increased, presumably because mannitol also crystallized. PRACTICAL APPLICATION: Controlling sorbitol crystallization in the presence of impurities is a key to controlling quality in certain confections.

Efficient Synthesis of Sugar Alcohols under Mild Conditions Using a Novel Sugar-Selective Hydrogenation Catalyst Based on Ruthenium Valence Regulation.

Sugar alcohols are the prominent alternatives of sugars in food, medical, and health industries. The ruthenium supported on multiwalled carbon nanotubes (Ru/MWCNTs) catalysts were prepared based on the Ru valence regulation strategy and applied for selective sugar hydrogenation to prepare various sugar alcohols including xylitol, arabinitol, sorbitol, mannitol, and galactitol for the first time, with high selectivity (>99.0%) and yield (>98.0%) under mild conditions (≤110 °C, 3.0 MPa H2 pressure). The hydrogenation reaction of xylose was further optimized and under mild conditions (100 °C, 3.0 MPa H2 pressure, and 500 rpm), which were lower than ever reported for high efficient synthesis of xylitol, 99.8% xylose conversion and 99.0% xylitol yield were achieved after 120 min of reaction.

Structure-Property Relationship of Amorphous Maltitol as Tableting Excipient.

Maltitol shows interesting properties compared with mannitol or sorbitol, two other polyols, which are widely used as a pharmaceutical excipients for tablet compaction. For this study, the properties of an amorphous polyol, maltitol, were investigated using a tablet press simulator. The aim of this study was to evaluate the behavior of amorphous maltitol compared to SweetPearl® P 200, a pure product, and SweetPearl® P 300 DC, a textured crystalline maltitol excipient for direct compression. The physicochemical and pharmacotechnical properties were compared, revealing a major change in properties after amorphization. The study of the tabletability, mean yield pressure, elastic properties, etc. shows that the compression behavior of amorphous powders has been significantly altered. The results showed specific properties of amorphous maltitol with good tabletability at low compaction pressure. The stability of the amorphous and the evolution of its behavior in compression were then studied, showing a direct link between its recrystallization and the change in its properties. The use of a stabilizing agent, maltotriitol, slowed down the recrystallization, maintaining the specific properties of the amorphous material in compression for a longer period of time.

Comprehensive liamocin biosurfactants analysis by reversed phase liquid chromatography coupled to mass spectrometric and charged-aerosol detection.

Liamocin biosurfactants and structurally related exophilins secreted by the Aureobasidium pullulans (A. pullulans) strain NRRL62031 were firstly analyzed by hyphenation of high-performance liquid chromatography (HPLC) with high-resolution mass spectrometry (HRMS). Ten different analytes were detected and identified by their accurate masses and divided into subclasses according to their different head groups: three liamocins with arabitol as head group, three mannitol liamocins, and four exophilins. A baseline separation of congeners within the subclasses was achieved by reversed phase HPLC on a C18 stationary phase, whereas an overlap of subclasses occurred. The structures were simultaneously confirmed by online tandem mass spectrometry (MS/MS) experiments in positive and negative ionization mode. The assigned polyol head groups and thus the feasibility of this method were confirmed by gas chromatography (GC)-MS data obtained after hydrolysis and derivatization of the liamocins. Based on the varying structural characteristics of liamocins, e.g. the polyol head group (or even none for exophilins) and the degree of acetylation, different detector response in LC-MS was expected, impairing relative quantification of congeners. Therefore, a complementary quantification method was developed using HPLC coupled to charged-aerosol detection (CAD), which allows the determination of the amount of the individual liamocin species without authentic liamocin standards. Hence, the here presented hyphenated techniques facilitate comprehensive analysis of liamocin biosurfactants.

Continuous Flow Upgrading of Selected C2-C6 Platform Chemicals Derived from Biomass.

The ever increasing industrial production of commodity and specialty chemicals inexorably depletes the finite primary fossil resources available on Earth. The forecast of population growth over the next 3 decades is a very strong incentive for the identification of alternative primary resources other than petro-based ones. In contrast with fossil resources, renewable biomass is a virtually inexhaustible reservoir of chemical building blocks. Shifting the current industrial paradigm from almost exclusively petro-based resources to alternative bio-based raw materials requires more than vibrant political messages; it requires a profound revision of the concepts and technologies on which industrial chemical processes rely. Only a small fraction of molecules extracted from biomass bears significant chemical and commercial potentials to be considered as ubiquitous chemical platforms upon which a new, bio-based industry can thrive. Owing to its inherent assets in terms of unique process experience, scalability, and reduced environmental footprint, flow chemistry arguably has a major role to play in this context. This review covers a selection of C2 to C6 bio-based chemical platforms with existing commercial markets including polyols (ethylene glycol, 1,2-propanediol, 1,3-propanediol, glycerol, 1,4-butanediol, xylitol, and sorbitol), furanoids (furfural and 5-hydroxymethylfurfural) and carboxylic acids (lactic acid, succinic acid, fumaric acid, malic acid, itaconic acid, and levulinic acid). The aim of this review is to illustrate the various aspects of upgrading bio-based platform molecules toward commodity or specialty chemicals using new process concepts that fall under the umbrella of continuous flow technology and that could change the future perspectives of biorefineries.

Mechanisms of Stereodirecting Participation and Ester Migration from Near and Far in Glycosylation and Related Reactions.

This review is the counterpart of a 2018 Chemical Reviews article (Adero, P. O.; Amarasekara, H.; Wen, P.; Bohé, L.; Crich, D. Chem. Rev. 2018, 118, 8242-8284) that examined the mechanisms of chemical glycosylation in the absence of stereodirecting participation. Attention is now turned to a critical review of the evidence in support of stereodirecting participation in glycosylation reactions by esters from either the vicinal or more remote positions. As participation by esters is often accompanied by ester migration, the mechanism(s) of migration are also reviewed. Esters are central to the entire review, which accordingly opens with an overview of their structure and their influence on the conformations of six-membered rings. Next the structure and relative energetics of dioxacarbeniun ions are covered with emphasis on the influence of ring size. The existing kinetic evidence for participation is then presented followed by an overview of the various intermediates either isolated or characterized spectroscopically. The evidence supporting participation from remote or distal positions is critically examined, and alternative hypotheses for the stereodirecting effect of such esters are presented. The mechanisms of ester migration are first examined from the perspective of glycosylation reactions and then more broadly in the context of partially acylated polyols.